Blog

Condensing Unit – Manufacturer & Supplier of Condensing Units in UAE

Posted by   | April 14, 2021

 Condensing Units / Air-Cooled Condenser

Firstly Finpower manufactured – Air-cooled condensers / Condensing Units use ambient air in order to cool and cycle refrigerant. Secondly, these can often be seen outdoors, as they are commonly used in exterior units in residential and rooftop cooling systems. Thirdly, and most importantly, the condensing unit manufactured by Finpower is a key component of all vapor compression systems.

The condenser is an important component of any vapor compression system. In a typical refrigerant condenser, the refrigerant enters the condenser in a superheated state. It is first de-superheated and then condensed by rejecting heat to an external medium. The refrigerant may leave the condenser as a saturated or a sub-cooled liquid, depending upon the temperature of the external medium and design of the condenser.

Why Air-cooled condensing unit?

  • Availability of air is in plenty.
  • Disposal of warm air is not a problem.
  • Simple in construction, as there are no pipes required for air.
  • The fouling of the condenser is small.
  • The maintenance cost is low.

What makes Finpower condensing unit?

  • Compressor: Single or Dual Hermetic sealed scroll compressors are used due to the high efficiency, which results from higher compression achieved at a lower rate of leakage.
  • Condensers: They are basically heat exchangers in which refrigerant undergoes a phase change. However, they are formed of seamless smooth surface or inner grooved copper tubing with mechanically bonded aluminum alloy plate fin slit type.
  • Air as an external medium: to cool the superheated vapor and then condensed by rejecting heat to an external medium
  • Cabinets: The unit cabinets are constructed of heavily zinc-coated galvanized steel. These are chemically cleaned and phosphatized to bond the specially formulated corrosion inhibiting, polyester powder coating.
  • Condenser Fan & Motor: Direct drive propeller type, aluminum alloy blades with permanently lubricated ball bearing and internal thermal protected, class F motors.

Finpower manufacturer & supplier of Condensing Unit provides efficient, low noise, eco-design compliance with Zero ODP (R407C/R410A) refrigerant. Our premium product–condensing unit has strong built with smooth aesthetics. Similarly, Finpower manufactured – condensing units have a significant impact on the productivity, reliability & energy efficiency of the building no matters the scale of your location, In conclusion, we can provide a unit that is highly efficient, sustainable & serviceable.

Contact Us for All Your Air Conditioning Needs

Finpower is always ready to help you boost your air conditioner equipment to a new level. We are well-versed in the manufacturing of Air Handling Units, Fan Coil Units, Ecology Units, Condensing Units, Electrostatic precipitator & Package Units. Write us at info for all your queries. We want your HVAC system to be your partner in better indoor air quality.

 

How Does Heating and cooling system affects the Indoor Air Quality?

Posted by   | March 7, 2021

Did you know that your HVAC system affects your indoor air quality?

Most of the time, your heating and cooling system benefits your home’s air quality and removes airborne particles.

We at Finpower Aircon LLC, sense everyone’s mindset on the current globally affected Covid19 pandemic and all the life changing events that are occurring due to this epidemic. Working from home, caring for your loved ones, stocking up things, Kids online classes gobble a great deal of time and energy.

With all these things going around, it’s quite obvious to forget your cooling and heating system and the importance to keep it in a good working environment before summer hits.

How Does Your Air Conditioning and Indoor Air Quality Connect?

You may wonder what the connection is between your air conditioning system and the quality of your indoor air. All heating, ventilation, and air conditioning (HVAC) systems use an air filter to remove a wide variety of particles that naturally end up in our indoor air.

A quality cooling system will help to regulate the relative humidity inside your Round Rock home, which helps improve the air you breathe. Moreover, Poor humidity, whether it’s too high or too low, can lead to the presence of mold, mildew, fungus, bacteria, and viruses.

Other related systems and technologies such as air purification systems and the condition and cleanliness of your air duct system can also affect your indoor air quality.

Causes of Poor Indoor Air Quality

We are all aware that outdoor air quality has a great impact on our overall health. What we don’t realize is that the level of pollution inside our homes and offices are so much higher than the outdoors.

We spend 90% of our time indoors, as a result, indoor air quality is worse than it is outdoors.

Indoor sources:

  • Human or Animal Activities – dead skin, hair, viruses or others
  • Cigarette Smoke
  • Dust
  • Bacteria
  • Mold

Outdoor Sources:

  • Pollen
  • Dust
  • Ventilation
  • Airflow Patterns
  • Air Filtration

How to Improve Air Quality?

Comfort: Breathing clean air is one of the joys of life and is certainly a major health benefit. Hence clean air delivered at the right humidity and in the right place is a perfect foundation for optimal comfort.

Energy Efficiency: Finpower’s products are highly energy efficient.

Reliable: Finpower’s products are renowned for their reliability.

Our Product Features that helps in improving the air quality:

High-efficiency motor: High efficiency and energy saving and quite operation, ensuring efficient, safe and maintenance-free operation.

Air Vent Valve: The unit is configured with air vent valve for convenient operation & quicker discharge.

Drain Pan: It ensures quick drainage of condensate water; with spray on both sides for anti-corrosion, the tray surface is cleaner; the integrated design is adopted to avoid cold bridges.

Centrifugal Double suction fan: The centrifugal double-suction fan featuring high-efficiency wide impeller and forward-curved multi-blade is adopted to implement low speed, large air flow and low noise.

Book an Assessment

We recommend all buildings nearing and over 20 years old have a qualified technician or engineer perform an assessment on your HVAC equipment. However, they should check the units in different areas of your building and determine the air quality and operational status of your equipment. They can then make a recommendation as to the state and lifespan of your existing mechanical equipment.

Contact Us for All Your Air Conditioning Needs

Finpower is always ready to help you boost your air conditioner equipment to a new level. We are well-versed in manufacturing of Air Handling Units, Fan Coil Units, Ecology Units, Condensing Units, Electrostatic precipitator & Package Unit. Write us at info for all your queries. We want your HVAC system to be your partner in better indoor air quality.

Demand Control Ventilation | Finpower Aircon

Posted by   | March 7, 2021

Save Energy without compromising your Comfort & Indoor Climate

Finpower’s Demand Control Ventilation (DCV) is a HVAC control system which is regarded as the most efficient way to balance indoor air quality with energy savings. The concept of demand controlled ventilation rests on the principle of providing occupants with the right amount of fresh air, when they need it, where it is useful. With intelligent airflow management (included demand controlled ventilation), energy savings are made on every occasion that the need for ventilation is low or null, which can represent more than half the time. Conversely, an activity that emits indoor air pollution such as preparation in a kitchen, a shower, or even the release of odorous metabolic compounds, generates a need for a greater ventilation to remove the pollution quickly.  Air inlets supply fresh air to rooms like bedrooms and living rooms & extract grilles take air away from wet rooms like bathrooms and kitchens. Fan is that which exhausts the extracted air out of the building.

At every moment, demand controlled ventilation offers an optimization of heating consumption and indoor air quality, on a fully automated basis. Ventilation system is designed on this concept of DCV, which beyond being particularly effective for the comfort of the occupant, has many other benefits.

Better air renewal for greater comfort by providing the ventilation for the places that need the most. When a main room is occupied, its relative humidity increases; the air inlets then open more to increase airflow and better evacuate stale air. Activity in wet rooms (kitchen, bathroom, toilets, etc.) is accompanied by water vapor emissions; the opening of the exhaust units increases with the relative humidity, increasing the airflow and so evacuating polluted air more rapidly.

The higher relative humidity generated by breathing and human activity in the kitchen or shower, for example, can lead to destructive condensation, in which molds can grow. When the relative humidity increases dangerously, humidity sensitive exhaust units open quickly to evacuate excess moisture and eliminate the risk of condensation.

 

 

 

 

 

 

 

What are the benefits of HVAC Control System at Finpower?

  • Energy Savings of 10% to 40%
  • Better air quality and more comfortable spaces
  • Increased employee health and customer satisfaction
  • Reduced operating costs
  • Installation savings with Utility rebates
  • Lowered monthly Utility bills
  • Greater energy efficiency
  • Less impact on the environment

The basic functions of DCV are:

  • Air is moved where the need is
  • Always step less
  • Always supervised

DCV regulates the following

Temperature – To maintain right temperature in the required premises.

Air quality – Ensuring the best to maintain a comfort and healthy living

Humidity– So that molds are not formed inside the premises

Occupancy – to save energy.

Who should install this technology?

  • Facilities with operating hours where occupancy varies and is unpredictable.
  • Buildings that seldom reach maximum occupancy.

Facilities that may qualify include:

  • Retail Stores
  • Commercial Buildings
  • Supermarkets
  • High Rise Residential
  • Theaters
  • Lecture halls and other performance spaces
  • Places of worship
  • Schools
  • Hospitals
  • Restaurants

Finpower proves its strong acumen in designing fresh air handling unit with Demand Control Ventilation (DCV) for energy saving. DCV is also used to monitor the carbon dioxide (CO₂) concentrations. CO₂ levels continuously fluctuate in buildings and as the concentrations changes, we can assign fans to ramp up on the set points. Finpower’s Air conditioning equipment can also be supplied with high-efficiency EC motor with fan wall arrangement in supply & extract completely integrated with HMI panel, monitoring and controlling the temperature of cooling coil & run around coil to optimize the power consumption, communicating on BMS protocol which is existing in the building.

Contact Us for All Your Air Conditioning Needs

Finpower is always ready to help you boost your air conditioner equipment to a new level. We are well-versed in manufacturing of Air Handling Units, Fan Coil Units, Ecology Units, Condensing Units, Electrostatic Precipitator & Package Unit. Write us at info for all your queries. We want your HVAC system to be your partner in better indoor air quality.

Finpower AHU Dehumidifier

Posted by   | September 10, 2018

Discover the Benefits of Finpower’s AHU Dehumidifiers

At Finpower Manufacturing HVAC, we’re proud to offer advanced Air Handling Unit (AHU) Dehumidifiers designed to meet the diverse needs of various industries. Whether you’re managing a large commercial facility or a residential complex, our AHU dehumidifiers provide robust solutions to maintain optimal indoor air quality and comfort.

 

Key Features:

  1. Superior Temperature and Humidity Control: Our AHU dehumidifiers ensure precise control of both temperature and humidity, making them ideal for critical applications such as indoor pools, healthcare facilities, and data centers​. Too much moisture in the air may lead to mould and mildew growth, as well as a host of health problems for sensitive persons.
  2. Efficient Design: Featuring aluminium pentapost construction with PUF insulated double skin GI panels, our dehumidifiers are built for durability and efficiency. The units come with pre-/post-cooling or heating modules and optional Variable Frequency Drives (VFDs) for intelligent operation.
  3. Advanced Controls: Each unit is equipped with a fully functional control system, providing enhanced operational efficiency. Integration with Building Management Systems (BMS) is also available.
  4. Customizable Options: Our dehumidifiers can be customized to meet specific client needs and budget constraints.

Benefits:

  • Healthier Air Quality: By maintaining ideal humidity levels, our AHU dehumidifiers reduce the risk of respiratory issues and skin irritations, creating a healthier environment for occupants​
  • Structural Integrity: Excess moisture can lead to structural damage such as corrosion and deterioration. Our dehumidifiers help protect the integrity of your building by effectively controlling humidity levels.

Applications:

Our AHU dehumidifiers are versatile and suitable for various settings, including:

  • Indoor swimming pools
  • Healthcare facilities
  • Data centers
  • Commercial buildings
  • Residential complexes

Why Choose Finpower?

Choosing Finpower means investing in a product that combines cutting-edge technology, customizable options, and energy efficiency. Our commitment to quality ensures that you receive a reliable solution that enhances indoor comfort while reducing operational costs.

Ready to learn more about how Finpower’s AHU dehumidifiers can benefit your facility? Contact us today to discuss your specific needs and find the perfect solution tailored to your requirements.

For more detailed information, visit our website.

By understanding and leveraging the advanced features and benefits of Finpower’s AHU dehumidifiers, you can ensure a safe, comfortable, and energy-efficient environment for all.

 

12